|
The SEAL AA3...
The latest version of the most successful Continuous Flow Analyzer ever made.
Building on the success of the TechniconTM / Bran+LuebbeTM AutoAnalyzer II and maintaining its reputation of high quality. Every part of the AutoAnalyzer 3 incorporates improvements enabled by modern electronics and mechanical technology to bring your laboratory higher performance and lower costs.
AA3 compatible with AutoAnalyzer II Modules
(Both TechniconTM AAII and Bran+LuebbeTM AAII Modules).
- TechniconTM AAII Pump III -> Seal AA3 Pump IV
- TechniconTM SCIC Colorimeter -> Seal Digital HR Colorimeter
- TechniconTM Sampler IV or Bran+Luebbe Compact, XYZ samplers -> Seal XY2/ XY3 Sampler.
Segmented Flow Analysis
The Seal AutoAnalyzer 3 uses all the advantages of air-segmented flow. With reaction times up to 20 minutes, even complex procedures like distillation can be automated. Dialyzers can be built into the system for elimination of interference from dirty or colored samples. Our proprietary in-line UV digestion procedure conforms to the ISO Standard Methods for automated measurement of Total Cyanide and Total Phosphorus.
Segmented Flow Advantages
- Fully Automatic Operation - Start up to Shut down
- Ultra Low Detection Limits
- 40 to 100 samples per hour
- over 700 documented applications
- Low reagent consumption
- Compatible with Technicon and Bran+Luebbe AutoAnalyzer II Systems
- Quick Method Change-over
- Wide range: dilution of sample is rarely necessary
Modular Design for high flexibility
A One Channel Seal AutoAnalyzer 3 System comprises a Sampler, Pump, Chemical Manifold, Detector and Computer. The system can easily be extended by adding a second Chemical Manifold and a second Detector. The Seal AutoAnalyzer then becomes a Two Channel System, which measures two different analytes at the same time. Additional Detector and Manifolds can be added, as required, up to a total of 8 channels.
Dual Range Methods
Most multitest methods are also dual-range; with separate pump tubes for high and low ranges. You can test an extremely wide range of sample concentrations. For example, the AutoAnalyzer 3 method for Nitrate in Seawater can measure up to 8500 ug N/L and has a detection limit of 0.14 ug/L. This same manifold can be used to measure Ammonia and Silicate.
AACE for Windows
AutoAnalyzer Control and Evaluation software for all Continuous Flow Analyzers. For large or small systems with high or low workloads: AACE makes daily operation quicker and easier.

|